Siemens SIMATIC PC RI25/45 Скачать руководство пользователя страница 10

Страница: 10 / 122

1-6

SIMATIC PC RI25/45, Technical Description

C79000-G7076-C808-01

The following rules are mandatory when carrying out any work on the open
unit, and should be read carefully before opening the unit:

Before you disconnect the power supply cable, discharge any electrostatic
charge on your body. You can do this by touching metallic parts, such as
screws, on the rear panel of the PC.

Discharge any electrostatic charge from tools that you are using.

Wear a grounding wrist strap if you are handling components.

Leave components and modules in their packing until you are ready to
install them.

Disconnect the PC from its power supply before plugging in or removing
any modules or components.

Touch components and modules only on their edges. Above all, do not
touch the connecting pins and printed conductors.

Do not operate the PC with the cover open.

Use a suitable Philips or Torx screwdriver to remove or install components.

Before Opening
the Unit

Tools

System Unit

Содержание SIMATIC PC RI25/45



























































































































Результаты поиска

Содержание SIMATIC PC RI25/45

Отзывы:

Похожие инструкции для SIMATIC PC RI25/45

Бренды по названию

Популярные бренды

Siemens SIMATIC PC RI25/45, Техническое описание

Результаты поиска

Содержание SIMATIC PC RI25/45

Отзывы:

Похожие инструкции для SIMATIC PC RI25/45

Бренды по названию

Популярные бренды