Siemens SIMATIC PC 847B Скачать руководство пользователя страница 91

Страница: 91 / 232

Maintenance and service

11.2 Reinstalling the software

SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01

11.2.2

Restoring the Factory State of the Software Using the Restore DVD

You can restore the software to the original factory state using the Restore CD (not included

in all package variants). The DVD contains the necessary images and tools for transferring

the factory software to the hard disk of your PC. You can restore the entire hard disk with

drive C: (system) and drive D: or only drive C:. This allows you to retain any user data on

drive D:.

Retrieving authorizations or license keys from the hard disk

●

Check whether you can retrieve your authorization or license key from the hard disk and

perform this procedure as described below if possible.

●

If backup is not possible, please contact Customer Support. There you can obtain

information necessary for software authorization.

CAUTION

If "Restore system partition only" is set all data on drive C: (system partition) will be

deleted. All data, user settings and all authorizations or license keys on drive C: are lost!

All data on drive C: of the hard disk will be deleted. Setup formats the hard disk and

installs the original factory software.
If "Restore entire hard disk" is set ALL data, user settings, authorizations or license keys

will be lost on the hard disk.

Restoring factory state

To restore the delivery state:
●

Place the Restore DVD into the drive and restart the device using the on/off switch.

●

When BIOS outputs the message

Press <F2> to enter Setup or <ESC> to show Boot menu

the ESC key. The "Boot Menu" is displayed when initialization is completed.

●

Select the optical drive using the cursor keys.

●

Follow the on-screen instructions.

CAUTION

All existing data, programs, user settings and authorizations or license keys will be

deleted from the hard disk and are therefore lost.

For information on the functions, refer to the README.TXT file on the Restore DVD.

Содержание SIMATIC PC 847B









































































































































































































































Результаты поиска

Содержание SIMATIC PC 847B

Отзывы:

Похожие инструкции для SIMATIC PC 847B

Бренды по названию

Популярные бренды

Siemens SIMATIC PC 847B, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC PC 847B

Отзывы:

Похожие инструкции для SIMATIC PC 847B

Бренды по названию

Популярные бренды