Planning use
3.2 Unpacking and checking the delivery
SIMATIC Panel PC 577
3-2
Operating Instructions, Release 04/2006, A5E00798484-01
3.2
3.2
Unpacking and checking the delivery
Procedure
1.
Please check the packaging material for transport damage upon delivery.
2.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
3.
Unpack the device.
Caution
Do not lie the device on its back. This will avoid any damage to an optical drive which
may be present. Lie the front side on a soft surface to avoid damaging the front panel
USB interface.
4.
Keep the packaging material in case you have to transport the unit again.
Notice
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
5.
Please keep the enclosed documentation in a safe place. You will need the
documentation when you start up the device for the first time.
6.
Check the package contents for completeness and any visible transport damage. Check
for completeness using the "Contents of Delivery" list in the Operating Instructions
(compact).
7.
Notify the delivery service in charge immediately if the packages contents are incomplete
or damaged.
Warning
Make sure that a damaged device is not installed or put into operation.
8.
Note the identification information as described in the "Operating Instructions (compact)"
document.
