Siemens SIMATIC NET SCALANCE WxM763, Руководство по эксплуатации, Страница: 31 / 80

Description of the device
4.8 Reset button
SCALANCE WxM763
Operating Instructions, 03/2022, C79000-G8976-C653-01
31
LED Color Meaning
Flashing yellow
Interval:
100 ms on /
100 ms off
Access Point mode:
With DFS (802.11h), the channel is scanned for one minute for
competing radar signals before the channel can be used for data
traffic.
DI
DO Off No function in firmware version V1.2.
C1
C2 Off The functionality of these LEDs is configurable for different
applications. It is disabled by default.
P1
P2
P3
P4 Off There is no connection over the Ethernet interface.
Green There is a connection via the Ethernet interface (Link).
Flashing
green and yellow
Data transfer via the Ethernet interface
R1
DI
DO Flashing green Depending on the device version, the following LEDs are flashing
to determine the location of the device:
•
R1, DI and DO (device version with DI/DO)
• R1, C1 and C2 (device version without DI/DO)
The "Flash LED" function is activated:
•
Either with SINEC PNI
• Or via the WBM page "Discovery and Set via DCP"
R1
C1
C2
4.8 Reset button
Position
NOTICE
Loss of the degree of protection
When the cover is not mounted correctly, the device loses its degree of protection IP30.
The Reset button is located behind the screw-on cover on the underside of the housing.