Installing the Device
2.3.2 Connecting Low DC Power
To connect a low DC power supply to the device, do the following:
1. Connect the positive wire from the power source to the positive terminal on the
terminal block.
1
3
2
4
1
Positive Terminal
2
Negative Terminal
3
Surge Ground Terminal
4
Braided Ground Cable
Figure 2.5
Terminal Block Wiring - Single DC Power Supply Inputs
1
3
1
2
2
4
RUGGEDCOM RS950G
Installation Manual, 01/2021, C79000-G8976-1037-06
13
