Technical Specifications
5.5 Fiber Optic Ethernet Port Specifications
5.5
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered
with the RUGGEDCOM M2200.
Gigabit Ethernet (1 Gbps) Optical Specifications
Note
These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20
to 85 °C (-4 to 185 °F) operation only.
Mode
Connec-
tor Type
Cable
Type
(µm)
Tx λ
(nm)
Minimum Maximum
Rx Sen-
sitivity
(dBm)
Rx Sat-
uration
(dBm)
Distance
(km)
Pow-
er Bud-
get (dB)
MM
LC
50/125
850
-9
-2.5
-20
0
0.5
11
MM
LC
62.5/125
850
-9
-2.5
-20
0
0.5
11
SM
LC
9/125
1310
-9.5
-3
-21
-3
10
11.5
SM
LC
9/125
1310
-7
-3
-24
-3
25
17
All cabling is duplex type unless specified otherwise.
Typical.
All optical power numbers are listed as dBm averages.
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of
patches and splices. Consult a Siemens sales associates when determining maximum segment distances.
5.6
Operating Environment
The RUGGEDCOM M2200 is rated to operate under the following environmental con-
ditions.
Ambient Operating
-40 to 85°C (-40 to 185 °F)
Ambient Storage Tem-
perature
-40 to 85°C (-40 to 185 °F)
Ambient Relative Hu-
midity
5% to 95%
Maximum Altitude
2000 m (6562 ft)
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
Non-condensing
5.7
Mechanical Specifications
Weight
4.8 kg (10.6 lbs)
Ingress Protection
IP20
Enclosure
18 AWG Galvanized Steel
RUGGEDCOM M2200
Installation Manual, 03/2020, C79000-G8976-1044-16
27