Siemens SIMATIC NET RUGGEDCOM APE1808, Руководство по настройке

Страница: 15 / 28

Overview
1.7 Default IP Addresses
interface. Typical port parameters for the internal interface, such as speed, duplex,
VLANs, and more, can be configured via RUGGEDCOM ROX II.
NOTICE
Interface settings configured via RUGGEDCOM ROX II must be mirrored within the
RUGGEDCOM APE1808 module. For instance, if a VLAN is assigned to the module in
RUGGEDCOM ROX II, a corresponding VLAN must also be configured via the mod-
ule's operating system.
1
2 2 3
4
1
Switch Fabric Data Plane
2
Line Module (10/100/1000Base-TX)
3
RUGGEDCOM APE1808 Module
4
Gigabit Ethernet (GbE) Network Interfaces
Figure 1.2 A RUGGEDCOM RX15xx Device With an RUGGEDCOM APE1808 Module Installed
1.7 Default IP Addresses
Based on the software platform installed on the RUGGEDCOM APE1808, the IP ad-
dresses for the front and/or internal ports may be pre-configured or set dynamically
by the Dynamic Host Configuration Protocol (DHCP).
Software Platform External Port (RJ45) Internal Port
Windows® 10 Enterprise 2019
LTSC
DHCP DHCP
Debian Linux® DHCP DHCP
6
RUGGEDCOM APE1808
Configuration Manual, 11/2019, C79000-G8976-1415-03