Assembly Instructions for SIMATIC NET PROFIBUS SpliTConnect System
A5E03375783A-02
13
Assembling the SpliTConnect tap
FDP
P
FDP
P
1. Unscrew the contacting element
(2) and pull it away from the
SpliTConnect tap (1).
2. Strip the cable with the
FastConnect stripping
tool
1)
.
1)
Refer to the assembly instructions for
the FastConnect stripping tool
3. Keep to the stripping lengths.
Caution!
The wires must not be
stripped.
0
.
4. Push the nut (3), strain relief (4),
seal (5) and shield contact
element (6) onto the cable.
Caution!
The metal washer (M)
of the shield contact element (6)
must point in the direction of the
strand holder (7).
5. Place the strand holder (7) onto
the insulated wires.
Caution!
Keep to the color
coding.
6. Insert the assembled cable in
the SpliTConnect tap (1). Make
sure that the coding (K) is
correct.
.
.
1
7. Tighten the nut (3) as far as it
will go.
8. Work through assembly steps 2
to 7 for the other two cable
outlets. Make sure that the
coding (K) is correct.
9. Insert the contacting element (2)
in the SpliTConnect tap (1). The
alignment is decided by the
groove (N) and the guide on the
contacting element (2).
Caution!
All 3 outlets must be
correctly assembled.
10. Tighten the contacting element
(2) as far as it will go.
It may help to insert a
screwdriver through the opening
in the contacting element (2).