SIMATIC NET
Compact Operating Instructions
Release 05/2019
English
ANT795-4MX (Omni-Antenna 2.4 / 5 GHz)
©
Copyright © Siemens AG 2019
All rights reserved
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages. All rights, including rights created by patent grant or
registration of a utility or design, are reserved.
Disclaimer of liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary correc-
tions included in subsequent editions.
Technical data subject to change without prior notice.
Siemens AG
Digital Industries
Postfach 48 48
D-90026 NÜRNBERG
GERMANY
Security information
Siemens provides products and solutions with industrial security func-
tions that support the secure operation of plants, systems, machines
and networks.
In order to protect plants, systems, machines and networks against
cyber threats, it is necessary to implement – and continuously maintain
– a holistic, state-of-the-art industrial security concept. Siemens’ prod-
ucts and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their
plants, systems, machines and networks. Such systems, machines and
components should only be connected to an enterprise network or the
internet if and to the extent such a connection is necessary and only
when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be
implemented, please visit
https://www.siemens.com/industrialsecurity.
Recycling and disposal
The products are low in pollutants, can be recycled and meet
the requirements of the WEEE directive 2012/19/EU for the
disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of
your old device contact a certified disposal company for electronic scrap
or your Siemens contact
https://support.industry.siemens.com/cs/ww/en/view/109479891.
Note the different national regulations.
Warning notice system
This manual contains notices you have to observe in order to ensure
your personal safety, as well as to prevent damage to property. The
notices referring to your personal safety are highlighted in the manual
by a safety alert symbol, notices referring only to property damage have
no safety alert symbol. These notices shown below are graded accord-
ing to the degree of danger.
DANGER
indicates that death or severe personal injury
will
result if proper
precautions are not taken.
WARNING
indicates that death or severe personal injury
may
result if proper
precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions
are not taken.
NOTICE
indicates that property damage can result if proper precautions are not
taken.
If more than one degree of danger is present, the warning notice repre-
senting the highest degree of danger will be used. A notice warning of
injury to persons with a safety alert symbol may also include a warning
relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated
only by
personnel qualified
for the specific task in accordance with the
relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training
and experience, are capable of identifying risks and avoiding potential
hazards when working with these products/systems.
1 Safety notes
WARNING
Danger due to lightning strikes
Antennas installed outdoors must be within the area covered by a
lightning protection system.
Make sure that all conducting systems entering from outdoors can be
protected by a lightning protection potential equalization system.
When implementing your lightning protection concept, make sure you
adhere to the VDE 0182 or IEC 62305 standard.
NOTICE
Improper use
The device (and its components) may only be used for the application
described in the catalog or the operating instructions. Combinations
with devices or components of other manufacturers are permitted it
they have been approved by Siemens.
Correct and safe operation of the device is guaranteed only when it is
transported, stored, set up, installed, used and maintained according
to the recommendations.
2 Components of the product
The following components are supplied with the antenna:
•
1x antenna with 1x N-Connector male
•
1x Compact Operating Instructions
Please check that the consignment you have received is complete. If it
is not complete or there are signs of external damage, please contact
your supplier or your local Siemens office.
C79000-89
74
-C366-05
