Siemens SIMATIC IPC847D Скачать руководство пользователя страница 49

Страница: 49 / 222

Installing and connecting the device

3.3 Connecting the device

SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA

3.3.6.2

Redundant power supply

Secure the power supply plugs, if necessary, to prevent the power cables from becoming

loose accidentally.

Procedure

1. Remove the fixing screws

②

at the

redundant power supply.

2. Remove the connector lock

①

at the

redundant power supply.

WARNING

Fire hazard
If the power supply plugs are secured with a connector lock, the power outlets must be

freely accessible to allow the device to be easily removed from the mains.

3.3.6.3

Network and USB cables

The strain relief provided in the scope of delivery is used to prevent accidental loosening of

the network cable from the device. One cable tie (not included in the package) is required for

each interface.
To fix the strain relief, you will need a TORX T10 screwdriver.

Содержание SIMATIC IPC847D































































































































































































































Результаты поиска

Содержание SIMATIC IPC847D

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC847D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC847D

Отзывы:

Бренды по названию

Популярные бренды