Siemens SIMATIC IPC847D Скачать руководство пользователя страница 106

Страница: 106 / 222

Device maintenance and repair

7.5 Installing the software

SIMATIC IPC847D

106

Operating Instructions, 01/2014, A5E32997454-AA

7.5

Installing the software

7.5.1

Sources for installation of the operating system

If the operating system is faulty, you can reinstall it with one of these DVDs:

●

With the recovery DVD and "Documentation and Drivers" DVD
The recovery DVD is included in the scope of delivery when you have ordered a device

with operating system. The recovery DVD includes:
–

The installation program for installing the operating system with the supported

languages

–

The tools for setting up the drives

The basic language of the installed operating system is English. If additional languages

are required, install these from the recovery DVD.
The "Documentation and Drivers" DVD contains the documentation and the hardware

drivers.

●

From the Restore DVD
The Restore DVD is included in the scope of delivery when you have ordered a device

with operating system. The DVD contains an image file with the following software:
–

Operating system with installed hardware drivers

–

Monitoring software, e.g., DiagBase.

7.5.2

Updating the operating system

Windows

The latest updates for the Windows operating system are available on the Internet at

Microsoft (

http://www.microsoft.com

) and on the device in the Start menu "Start > All

Programs > Windows Update > Check for updates".

Note
Before you install new drivers or operating system updates for Windows MUI versions,

configure the regional menu and dialog settings and the default English (US) language.

other operating systems

Contact the corresponding manufacturer.

Содержание SIMATIC IPC847D































































































































































































































Результаты поиска

Содержание SIMATIC IPC847D

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC847D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC847D

Отзывы:

Бренды по названию

Популярные бренды