Siemens SIMATIC IPC677D, Руководство по эксплуатации

Страница: 26 / 196

Mounting and connecting the device
3.1 Preparing for mounting
SIMATIC IPC677D
26
Operating Instructions, 09/2014, A5E32995420-AC
NOTICE
Damage from condensation
If the device is subjected to low temperatures or extreme fluctuations in temperature
during transportation, as is the case in cold weather, for example, moisture can build up
on or inside the device (condensation).
Moisture causes a short circuit in electrical circuits and damages the device.
In order to prevent damage to the device, proceed as follows:
•
Store the device in a dry place.
•
Bring the device to room temperature before starting it up.
•
Do not expose the device to direct heat radiation from a heating device.
•
If condensation develops, wait approximately 12 hours or until the device is
completely dry before switching it on.
7. Please keep the enclosed documentation in a safe place. It belongs to the device. You
need the documentation when you commission the device for the first time.
8. Write down the identification data of the device.
3.1.2 Device identification data
Unpacking the device
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the identification data in the table below:
Identification date Source Value
Serial number Rating plate S VP ...
Order number of the device Rating plate 6AV7260.....
Microsoft Windows Product Key
Certificate of Authenticity (COA) Back of the de-
vice
Only devices with preinstalled
Windows operating systems
have the COA label
Ethernet address 1 BIOS setup,
"Main" menu
Ethernet address 2
CP 1616 onboard MAC Address Layer 2 (only
for PROFINET devices)
CP 1616 onboard MAC address PROFINET
(only for PROFINET devices)