Siemens SIMATIC IPC547J Скачать руководство пользователя

Страница: 50 / 198

Safety instructions

2.6 Safety instructions on device and system extensions

Operating Instructions, 01/2021, A5E43920357-AA

Danger from unauthorized or improperly performed repairs

WARNING

Danger due to unauthorized opening or improperly carried out repairs or extensions

Improperly carried out repairs or extensions to the device can lead to property damage or

danger to the users.
If you install or exchange system expansions and damage your device, the warranty

becomes void.

Risk of overheating when using expansion cards

CAUTION

Fire hazard due to overheating of the device

Expansion cards generate additional heat. The device can overheat or cause a fire.
•

Observe the safety and installation instructions for the expansion cards.

•

Note the maximum power consumption permitted for the device, see "General technical

specifications (Page 145)".

Limitation of liability

Note

•

All technical specifications and approvals of the device only apply if you use expansion

components that have a valid CE approval (CE mark).

•

Observe the installation instructions for expansion components in the associated

documentation.

•

UL approval of the device only applies when the UL-approved components are used

according to their "Conditions of Acceptability".

•

We are not liable for functional limitations caused by the use of third-party devices or

components.

Содержание SIMATIC IPC547J







































































































































































































Результаты поиска

Содержание SIMATIC IPC547J

Отзывы:

Похожие инструкции для SIMATIC IPC547J

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC547J, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC547J

Отзывы:

Похожие инструкции для SIMATIC IPC547J

Бренды по названию

Популярные бренды