Siemens SIMATIC IPC547E, Руководство по эксплуатации

Страница: 48 / 154

Commissioning the device
4.3 Automatic switching on of the device
SIMATIC IPC547E
48
Operating Instructions, 02/2014, A5E32317120-AB
4. Make the required region and language settings.
If you want your system language to be international, select English. Information for
subsequent changing of the region and language settings, see the section "Setting up the
language selection using the Multilanguage User Interface (MUI) (Page 104)".
Note
Once the operating system has been set up, the device may restart.
5. Type in the product key as required.
The product key is located on the "Certificate of Authentication" in the "Product Key" line,
see section "Device identification data (Page 33)".
Result
The interface of the operating system is displayed every time you turn on the device and
after the startup routine.
4.3 Automatic switching on of the device
You can specify "Power Failure Recovery" in the BIOS Setup entry so that the device
automatically starts up again after a separation from the mains voltage for more than 20
seconds.
Automatic startup may endanger the operation of the machine or plant, for example, after a
power failure.
Take the BIOS Setup entry "Power Failure Recovery" into consideration in the plant
planning.