Installing and connecting the device
3.2 Mounting the device
SIMATIC IPC327E
20
Operating Instructions, 06/2019, A5E40965257-AD
●
Desk mounting position
Take into account the permitted temperature range for operation that depends on the
mounting position in accordance with the "Technical specifications (Page 51)" section.
Ensure that the following clearances measurements to another component or to a wall of a
housing are complied with:
●
Below the device:
≥ 100
mm
●
Above the device: ≥ 50
mm
3.2
Mounting the device
3.2.1
Mounting instructions
Note
If the equipment is used in manner not specified by the manufacture, the protection provided
by the equipment may be impaired.
Note the following:
●
The device is approved for operation indoor only.
●
For installation in a control cabinet, observe the applicable country-specific regulations.
●
When the device is used in the area of Industrial Control Equipment in accordance with
UL61010-2-201, note that the device is classified as "Open Type". A UL61010-2-201
conform enclosure is therefore a requirement for approval or operation according to
UL61010-2-201.
●
All the external circuit of the device should be SELV circuit.