manualshive.com logo in svg

Siemens SIMATIC Box PC 820, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC Box PC 820 Скачать руководство пользователя страница 96

2-58

Box PC 820 / PC FI45 V2, Manual

A5E00051531-03

Settings

Supervisor

Password is

[Disabled] Password is not active

[Enabled Password is active. Changes the BIOS Setup can only be

made after the password has been entered. A user password
can be entered.

When the password is entered, the field is automatically switched from
[Disabled] to [Enabled] .

User

Password is

[Disabled] Password is not active

[Enabled] Password is active. BIOS-Setup can only be opened after the

password is entered. No changes can be made, except to the
user password.

When the password is entered, the field is automatically switched from
[Disabled] to [Enabled] .

Set

Supervisor

Password

This field opens the ” Enter Password” dialog box. After the supervisor
password has been entered, it can be modified, deleted with the ”
Return” key and deactivated.

Set User

Password

This field opens the ” Enter Password” dialog box. After the user
password has been entered, it can be modified, deleted with the ”
Return” key and deactivated.

Password on

boot

[Disabled] No password required on booting.

[Enabled] Supervisor- oder user-password  must be entered on booting.

Fixed disk

boot Sector

Normal 

All types of access to the hard disk are permitted.

protected  No operating system can be installed. This also provides

protections against boot viruses.

Diskette

access

only valid for
LS 120 drives

This protection  is only active, if Password on boot ” is  [enabled].

Supervisor

:

 Access to the diskette is only possible if the supervisor

password was entered on booting.

User 

Access to the diskette is only possible if the user password
was entered on booting.

Motherboard

StockCheck.com

Содержание SIMATIC Box PC 820





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды