Siemens SIMATIC Box PC 820, Руководство пользователя

Страница: 157 / 196

7-5
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
7.5 Installation under Windows 95 / Windows 98
To install the software under Windows 95 / Windows 98, proceed as follows:
S
Install according to the instructions in chapter 7.2.
S
Accept the license conditions.
S
Select either the Elo 2310, 2210 or 2300 Smartset Serial Controller on
Com2.
S
Restart the computer so that the changes will take effect.
Calibrating the Touch Screen
After restart, follow the instruction on the screen in order to calibrate the Touch
Screen.
Double Touch (Similar to a Mouse Click)
Although the double-click speed of the mouse can be set using the sequence Start/
Settings/Control Panel/Mouse, it is also necessary to define the size of the double
touch field for the touch screen. This is necessary, because the second touch
made in a double touch sequence will not occur in exactly the same location as the
first one.
To set a field size of 25 x 25, proceed as follows:
S
Go to the Control Panel via Start > Settings
S
Double-click the Elo Touchscreen button to activate the touch screen control
window.
S
Select the tab Buttons
S
Enter the field size next to the Double-click area (10-100 pixel):
S
Confirm with “OK.”
To set a field size other than 25 x 25, proceed as follows:
S
Select the tab Buttons in Touchscreen control window
S
Enter the desired field size next to the Double-click area (10-100 pixel):
S
Confirm with “OK.”
The full-screen mode is not supported; however, the Windowed DOS mode is
supported fully. If you turn on the full-screen mode via the touch screen, the
system will immediately return to the Windows desktop. However, you can operate
programs with the mouse in full-screen mode.
Note
The touch screen will not function if it is touched while Windows 95 is starting up.
Touch Screen (Optional with PC FI45 V2)
Siemens Distributor
StockCheck.com