Table 7-2
Technical specifications 6DL2804-xMDxx / xMExx (for mining)
6DL2804-
xMDxx
xMExx
Wall-mounted enclosure
Type 6DL2804-0xxxx, DMT 02 ATEX E 249 U
Ex marking
see below - section Ex marking
Degree of protection
1)
IP54/IP55
Dimensions: W x H x D
650 x 450 x 230
950 x 450 x 230
Material
Stainless steel: DIN 1.4404, plate thickness 1.5 mm
Weight [kg]
35
39
Cover seal
Silicone rubber
Cable entries for
Voltage (cable-Ø in mm)
6 M25 (Ex e)
(9 to 12 )
Bus (cable-Ø in mm)
Signals (cable-Ø in mm)
M32 (18 to 21)
M32 (18 to 21)
3 / 1 row (1Mxxx)
6
9
5 / 2 rows (1Mxxx)
12
18
Equipotential bonding rail
3 x 10 mm Cu
Bonding terminals
0.75 to 35 mm² Ex e for equipotential bonding cable, 4 mm² for shield connection
Protective conductor connector
M6 screw, at least 16 mm²
Rated voltage/current
2)
These values depend on the installed components.
Operating temperature range
6DL2804-1xxxx with installation of
ET200iSP
-20° C to +xx °C
3)
Permissible humidity
Max. 95%
1)
The degree of protection of the enclosure depends on that of the installed parts and the enclosure size.
2)
The actual electrical values depend on the electrical equipment installed. The manufacturer specifies the final values within
the framework of these limits.
3)
The specified permissible operating temperature range is only valid if the enclosure is installed horizontally. A vertical
installation can reduce the maximum permissible temperature (for information on this refer also to the ET200iSP manual).
The max. operating temperature is defined depending on the dissipated heat of the installed components, and specified
on the nameplate.
Note that the operating temperature of the complete setup must be checked again if further components are subsequently
fitted.
Table 7-3
Technical specifications 6DL2804-xxKxx / xxTxx / xxUxx
6DL2804-
xxKxx
xxTxx
xxUxx
Wall-mounted enclosure
Type 6DL2804-0xxxx, DMT 02 ATEX E 249 U
Ex marking
see below - section Ex marking
Degree of protection
1)
IP54 to IP66
Dimensions [mm]: W x H x D
800 x 800 x 300
1 000 x 1 000 x 300
1 000 x 1 200 x 300
Technical specifications
Distributed I/O device 6DL2804-1xxxx & 6DL2804-2xxxx
30
Hardware Installation Manual, 07/2017, A5E42025214-AA
