Commissioning
6.3 Reinstalling the software
SIMATIC Rack PC 647B
28
Getting Started, 12/2008, A5E02147333-01
Switching off the device
Note
On a Windows platform, always shut down the PC by clicking Start > Close.
Press the on/off button behind the front panel door. The green power LED is switched off.
Disconnect the mains connector to isolate the device from mains.
6.3
Reinstalling the software
General installation procedure
In case of errors in your software installation, you can reinstall your software using the
Recovery CD or DVD, the Documentation and Drivers CD or the Restore DVD.
●
Recovery CD or DVD: The recovery CD/DVD contains the Windows user interface with
tools for configuring the hard drives, and for installation of the operating system and the
languages supported by the operating system (MUI).
The base language of the operating system to be installed is English. If you want to
integrate additional languages, you will need to subsequently install them from Recovery
CD 2 or DVD.
●
Documentation and Drivers CD: Contains the documentation and the hardware drivers.
●
Restore DVD: Contains a hard disk image file with the original software (operating system
with installed hardware drivers).
Restoring the factory condition
●
Place the Restore DVD into the drive and restart the device.
●
Press the ESC button when the BIOS message "Press <F2> to enter Setup" appears.
After initialization, a "Boot Menu" is displayed.
●
Select the optical drive using the cursor keys.
●
Now follow the instructions on the screen.
CAUTION
All existing data, programs, user settings, authorizations and license keys on the drives
will be deleted and are thereby lost.
For information on the functions, refer to the README.TXT file on the Restore DVD.
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
+86-755-8660-6182
