Siemens SIMATIC 627B, Руководство по эксплуатации

Страница: 47 / 244

SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02
45
Commissioning
7
7.1 Requirements for commissioning
● Connect the peripherals, such as the keyboard, mouse, monitor and the power supply,
before putting the device into operation.
● The operating system of your device is preinstalled on the hard disk.
CAUTION
Risk of damage to the device!
Make sufficient allowances for the device to acquire room temperature before you put it
into use. If condensation has developed on the device wait at least 12 hours before you
switch it on.
7.2 Basic commissioning - initial startup
The PC operating system is automatically set up the first time you switch on the device.
Procedure:
1. Set the ON / Off switch to I position (On). The PC performs a POST. During the self-test,
this message appears:
Press <F2> to enter SETUP or <ESC> to show the Boot menu
2. Wait until this message is cleared, then follow the instructions on the screen.
3. Type in the Product Key as required. You find this key on the "Certificate of
Authentication", in the "Product Key" line.
NOTICE
The PC may not be switched off when you run setup.
Do not change the default BIOS settings, otherwise the operating system setup may
become corrupted.
4. Automatic restart