Siemens SIMATIC 627B Скачать руководство пользователя

Страница: 42 / 244

Connecting

6.2 Connecting the 120 V / 230 V Ac power supply

SIMATIC Box PC 627B

Operating Instructions, 06/2008, A5E00927393-02

6.2

Connecting the 120 V / 230 V Ac power supply

Note before connecting the device

Note
The varying voltage power supply module is designed for operation on 120/230/240 V AC

networks. The setting of the voltage range takes place automatically.

WARNING

Do not connect or disconnect power and data cables during thunderstorms.

WARNING

The device is designed for operation on grounded power supply networks (TN networks to

VDE 0100, Part 300, or IEC 60364-3).
Operation on ungrounded or impedance-grounded power networks (IT networks) is

prohibited.

WARNING

The permitted nominal voltage of the device must conform with local mains voltage.

CAUTION

The mains connector must be disconnected to fully isolate the device from mains. Ensure

easy access to this area.
A master mains disconnect switch must be installed if the device is mounted in a switch

cabinet.
Always ensure free and easy access to the power inlet on the device or that the safety

power outlet of the building installation is freely accessible and located close to the device.

Note
The power supply contains an active PFC (Power Factor Correction) circuit to conform to the

EMC guidelines.
Uninterruptible AC power systems (UPS) must supply a sinusoidal output voltage in the

normal and buffered mode when used with SIMATIC PCs with an active PFC.
UPS characteristics are described and classified in the standards EN 50091-3 and IEC

62040-3. Devices with sinusoidal output voltage in the normal and buffered mode are

identified with the classification "VFI-SS-...." or "VI-SS-....".

Содержание SIMATIC 627B





















































































































































































































































Результаты поиска

Содержание SIMATIC 627B

Отзывы:

Похожие инструкции для SIMATIC 627B

Бренды по названию

Популярные бренды

Siemens SIMATIC 627B, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC 627B

Отзывы:

Похожие инструкции для SIMATIC 627B

Бренды по названию

Популярные бренды