34
Troubleshooting Minor Faults
!
Risk of electric shock
Turn the program selector to Off .
Disconnect the washing machine from the mains.
Turn off the water tap.
Call Customer Service.
If repaires are needed, and assuming that you
cannot eliminate the fault yourself with the aid
the following table:
Repairs must only be carried out by our
Customer Service or an authorized technician.
,,
, ,
Fault
Detergent residue in the
detergent dispenser.
The loading door cannot
be opened.
Select
Spin
or
Drain.
Clean and dry the detergent
dispenser(refer to Page 30)
Use the dispensing aid for liquid
detergent.
Cause
Action
Rinse hold
was selected.
Safety function is active.
Wait for 2 minutes.
Detergent was damp or
lumpy.
The gasket is crimped.
This may appears after
installing the transport bolts.
Remove the transport bolts, operate
the machine for a period of time,
the gasket will return to the original
shape.
The belt gets off the pulley.
Too much laundry is in the
drum or the laundry is put in
badly, and close the window
with excessive force.
Put in the laundry well and
according to the maximum
load specification.
Close the loading door(a click
should be heard).
The program does not start.
The Ready/Wash and
Start/Pause indicator light
flash.
Loading door not closed.
Check whether laundry is trapped
in door.
,,
, ,
,,
, ,
,,
, ,
This Manual: http://www.manuallib.com/file/2488819
