SICHARGE UC Dispenser UL |
Operating Instructions
11.1 Disposing of packaging
The environmental protection and the preservation of its resources are of high priority for our
company goals. A worldwide environmental management system in accordance with ISO 14001
ensures compliance with the law and sets high standards. Environmentally friendly design, technical
safety, and health protection are solid targets even during the development of our products. Below,
please find the recommendations for environmentally friendly disposal of the SICHARGE UC dispenser
and its components.
Disposing of packaging material
• Dispose of packaging material in an environmentally friendly manner or recycle the
material.
Comply with the waste disposal regulations and environmental protection regulations.
• If needed, contact a specialist disposal company.
• Wooden packaging for sea transport consists of impregnated wood. Observe the local
regulations.
11.2 Disposing of the charging station
For environmentally friendly recycling and disposal of the device, contact a certified electronic waste
disposal company. Dispose of the device and specific material, such as capacitors,
in accordance with the
applicable regulations in your country. The device should be rendered inoperable before disposal.
Recycling considerations
SICHARGE UC is an environmentally friendly product with long lifetime and high recyclability. Key
components should be treated per the following recommendations:
Parts
Recommended Treatment
Steel
parts
Materials
recovery
Plastic parts
Thermoplastic parts possible for materials recovery
Thermosetting
Parts for incineration or recovery
Copper
parts
Materials
recovery
Main transformer
Materials recovery (steel & copper/aluminum)
Circuit
boards
Landfill/discard
Capacitors
Discard/recovery/reuse
Note:
Because of safety reasons, consider the safety instructions in this Operating Manual. The
product should be dismantled by qualified personnel. Please get in contact with your local Siemens
Service.
SECTION 11
Disposal
104
