Siemens Servo Screen 390, Руководство по обслуживанию, Страница: 40 / 49

Servo Screen 390
40 E382 E394E 061 01 02 02
Siemens-Elema AB
Malfunction
Action
It is not possible to print out on the
connected printer. • Check/replace the printer cable.
• Make sure that the printer itself is properly
configured.
• Make sure that the connected printer is
selected in the printer list in Servo Screen
390.
• Try to connect another printer.
• If none of the above, replace PC 1662/
PC 1835.
Information message ”Replace Servo
Screen 390 battery” remains in the
Message window although the battery has
been replaced. • Confirm the battery replacement using the
B
ATTERY
C
HANGE
icon in the Service Menu.
• If not the above, replace PC 1662/PC 1835.
It is not possible to set Time or Date in
Servo Screen when connected to a SV 300/
300A. • Make sure that the communication cable
between Servo Screen and SV 300/300A
is connected to N82 on SV 300/300A.
The Servo Screen 390 starts up, but does
not display any information (e.g. curves or
numerical values) from the SV 300/300A. • Reset the memory in SV 300/300A-PC
1587. See SV 300/300A – Service Manual
(printed 1996 or later).
5. Troubleshooting
5