Siemens Servo Screen 390, Руководство по обслуживанию, Страница: 2 / 49

Servo Screen 390
2 E382 E394E 061 01 02 02
Siemens-Elema AB
General
The documentation for the Servo Screen 390
consists of:
• Operating Manual
• Service Manual
• Spare Parts List
The Operating Manual is an indispensable
complement to the Service Manual for proper
servicing.
As the Servo Screen 390 is a part of the Servo
Ventilator system, there are also other
documents that can be useful when servicing
the Servo Screen 390:
• Servo Ventilator 300/300A
– Operating Manual
– Service Manual
– Circuit Diagram
– Reference Manual, Computer Interface
• Servo Ventilator 900C/E
– Operating Manual
– Service Manual
– Circuit Diagram
– Reference Manual, SCM 990
Text inside a box is used to highlight
important information.
In addition to the Important information given
here and in the related documents (e. g. in the
Operating Manual), always pay attention to
applicable local and national regulations.
Responsibility for the safe functioning of the
equipment reverts to the owner or user in all
cases in which service or repair has been done
by a non-professional or by persons who are
not employed by or authorized by Siemens,
and when the equipment is used for other than
its intended purpose.
There are two different versions of the Servo
Screen 390:
• Serial No. 10000 or lower – Equipped with
Computer board PC 1662 and a software
memory card of PC Card™-type.
• Serial No. 10001 or higher – Equipped with
Computer board PC 1835 and a software
memory card of CompactFlash™-type.
All information in this Service Manual is valid
for both versions unless stated otherwise.
Hazard notices
Make sure that all cables are disconnected
from the connection ports when disassembling
or assembling the Servo Screen 390.
Service
When working with ESD sensitive compo-
nents, always use a grounded wrist band and
grounded work surface. Adequate service tools
must also be used.
Worn-out batteries must be returned
to the place of purchase or to a place
where they can be safely disposed
of. Batteries must not be disposed
of with ordinary waste. All other
parts shall be discarded according to
hospital rules and in an environ-
mentally safe way.
Functional check
After any service intervention in the Servo
Screen 390, perform a Functional check
according to the instructions in the Operating
Manual.
To responsible service personnel
The contents of this document are not binding.
If any significant difference is found between
the product and this document, please contact
Siemens for further information.
We reserve the right to modify products
without amending this document or advising
the user.
Only personnel authorized by Siemens shall be
permitted to service or repair the Servo Screen
390. Only Siemens-Elema genuine spare parts
must be used. PC boards (spare parts) must
always be kept in a package for sensitive
electronic devices. Siemens will not otherwise
assume responsibility for the materials used,
the work performed, or any possible
consequences of same.
Important
Pb
Important