Siemens SENTRON 5TT7, Системное руководство, Страница: 18 / 64

Module
2.5 Configuring
Auto messages/periodical message
The GSM alarm module can send a message regularly, i.e. at user-defined times:
Daily: set the time (hh:mm)
Weekly: set the day and the time (hh:mm)
Monthly: set the day of the month (1 to 29) and the time (hh:mm)
All active users receive this message.
The actual status of all I/Os can be added to the message ("periodical message followed by
IO status message").
Startup/power cycle message
Each time it is started, the GSM alarm module can send a message so that users are
informed about the fact that the operating voltage has been activated again.
Power down message
In the event of a power failure, the module still has enough energy to send an SMS message
to active users. The GSM alarm module registers a power failure whenever the voltage
drops below 8 V and switches on again at a voltage over 10 V.
Note
The module tries to send the SMS message to all active users, but only sending of the SMS
to the first 5 active users is guaranteed.
Active users
Active users are those who have full access to the module and who receive automatic
messages. The order of notification is determined by the order of the chosen users (No. 1 to
10).
You can only choose active users from the phonebook.
Deactivate the checkbox next to the relevant active user if that user is to be permitted to
access the GSM alarm module, but is not to receive messages from the module.
When you click on the "Copy users to IOs" button, you copy the selected active users to all
I/O pages.
GSM alarm module
18
System Manual, 06/2014, 2541304131-01