Siemens SENTRON 5TT7 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 64

Siemens SENTRON 5TT7 Скачать руководство пользователя страница 15

Module

2.4 Managing settings

2.4.2

Data exchange

Click on the "Data exchange" button to exchange data with the module.

1.

Upload settings to module

Loads the current values set in the configuration software to the module.

Note
When settings are uploaded into the module, all the current settings in the module are

overwritten. This is why you should first download and save the module's settings before

loading new settings into the module.

2.

Download from module

Loads all the module's settings into the configuration software.

3.

Reset module to default

Resets all the module's settings to the factory defaults.

4.

Sync. date/time

The module's date and time are synchronized with the PC's system time.

5.

Restart device

Due to the capacitor installed in the module, it is not possible to trigger a fast restart by

interrupting the operating voltage.

Click on this command to restart the device by the software.

6.

Connect to module

The module is connected to the PC via the US connection.

GSM alarm module
System Manual, 06/2014, 2541304131-01

15

«
...
13
14
15
16
17
...
»

Содержание SENTRON 5TT7

































































Отзывы:

Нет отзывов