Siemens SD 270 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 58

Siemens SD 270 Скачать руководство пользователя страница 29

SM010-3 Siemens SD 270 Operating & Service Manual Page 29

e) If required, readjustment of the input signal level can be accessed by

temporarily deselecting the MASK key - then proceed as in 3.1d)

4.2

Procedure:

As described in 3.2 but adjusting the masking level as required.

IMPORTANT NOTES – FREE FIELD MODES

For the following Free Field modes of operation it is essential for the Free

Field calibration procedure described in Appendix 2 of this operating

manual to have been performed. This aspect may also be subject to local

requirements or legislation.

5. Free Field Live Voice Speech Audiometry

5.1

Set Up:

a) Connect an external amplifier/speaker to the LINE OUT jack socket;

refer to Section 2.7 of this operating manual

b) Connect a microphone to the MIC1 input on the audiometer
c) Press SPEECH & FREEFIELD and use Softkey 1 to ensure that ‘MIC’

is displayed in capitals (indicating that the external microphone is
selected)

d) The external microphone is now routed to the external amplifier and

speaker; use LEFT and RIGHT to select the required amplifier
channel

e) Continue from 1.1d) above

5.2

Procedure:

As described in 1.2.

6. Free Field Recorded Speech Audiometry

6.1

Set Up:

a) Connect an external amplifier/speaker to the LINE OUT jack socket,

and a CD, tape player, or other sound source to the LINE IN jack
socket; refer to Section 2.7 of this operating manual

b) Press SPEECH & FREE FIELD and use Softkey 1 to ensure that

‘LINE’ is displayed in capitals (indicating that the line input is selected)

«
...
27
28
29
30
31
...
»

Содержание SD 270



























































Отзывы:

Нет отзывов