Siemens SCD 1515-E, Руководство по эксплуатации

Страница: 50 / 56

Operating Instruction
Main menu Function Adjust function / value / range Description
Options 2 DPMS ON – OFF Display Power Management System (DPMS) on or off
If DMPS activated, the monitor is turn off (backlight) when a
synch signal is left. The screen is dark.
Source scan OFF – ON – Standard Standard: ON
Note: To scan new video source is not relevant because the
monitor has one RGB input source only.
Blank color red – green – blue – black Choose the background color of the screen when no input signal
is present.
Frame color red – green – blue – black Choose the frame color of the screen when input signal does not
fill screen (see scaling).
Info signal source ON – OFF Input source icon on or off
The icon is shown when input signal are changed. The icon
shows the following information’s:
- signal source (e.g. RGB analog)
- Mode number (internal mode number of the timing list)
- Image resolution of the input signal
- H- and V-frequency
Utilities Language English – German OSD language
Calibration <+> press Adjustment of the internal A/D converter
(following the menu instruction)
freeze frame ON – OFF freeze the actual shown picture
Factory reset <+> press Reset of values like brightness, contrast,.. to default values
Installation RGB-Mode <+> press Enter a new timing which is not in the internal timing table. This
function should used, when the shown image resolution is not
the resolution are expect.
When press <+> the sub menu expect 9 timing parameter.
When <+>,
H- and V-Frequency – Show the H- and V-Frequency of the present input signal.
H/V-total, H/V-start – Show the used timing parameter of the present input signal
Option Var. RGB-Mode inactive, Mode1, Mode2,
Mode3 Inactive: used the internal timing table only
Mode1: use the timing parameter and perform a complete auto
adjustment. (usually used)
Mode2: use the timing parameter and perform an auto
adjustment without an automatic image position adjustment.
Mode3: use the timing parameter and perform an auto
adjustment without an automatic frequency adjustment.
H-resolution 100 to 2000 through key (+/-) Horizontal image resolution (important parameter)
V-resolution 100 to 2000 through key (+/-) Vertical image resolution (important parameter)
H-total 100 to 2500 through key (+/-) Whole pixel per line (important parameter)
H-Start 0 to 750 through key (+/-) Number of Pixels from H-sync start to image start
V-Start 0 to 500 through key (+/-) Number of lines from V-sync start to image start
Install <+> press Activate the feed timing parameter
test pattern <+> press Show a test image
Info Firmware, Resolution,
Timing
– Show the firmware version and timing data of the present input
signal
LCD-Monitor SCD 1515-E page 50 / 56
DOC-No.: B30058DE8.doc