Siemens SCD 1515-E, Руководство по эксплуатации

Страница: 49 / 56

Operating Instruction
OSD-Menu-Function
Main menu Function Adjust function / value / range Description
Picture 1 Brightness setting range:
0 to 100 through key (+/-) adjust brightness
Contrast setting range:
0 to 100 through key (+/-)
adjust contrast
change contrast between dark and light colors
H Position setting range:
0 to 100 through key (+/-) move picture in horizontal direction
V-Position setting range :
0 to 100 through key (+/-)
move picture in vertical direction
Phase setting range :
0 to 31 through key (+/-)
adjust phase of input signal
Frequency setting range :
950 to 1050 (dependent to picture)
through key (+/-)
adjust frequency of input signal
Scaling fill all; fill aspect ratio, one to one select predefined scaling
adv. scaling setting range :
950 to 1050 (dependent to picture)
through key (+/-) adjust non-linear scaling
Picture 2 Sharpness 1, 2, 3, 4, 5 adjust sharpness of the picture by using no. 1 to 5
1=sharp, 5= soft
Gamma Linear or CRT correction of gamma curve
value of colors will be forwarded to the display
Color temperature 5000 - 6500 – 9300 - VAR color temperature / adjust color
three defined and one adjustable color temperatures are for
selection
activate „VAR“ - for RGB shows up a adjustment beam.
0 to 100 % (50% correspond to factor 1)
Options 1 OSD select between nine defined OSD positions f define position OSD
OSD H-Position setting range :
0 to 100 through key (+/-) move OSD-menu in horizontal position
OSD V-Position setting range :
0 to 100 through key (+/-) move OSD-menu in vertical position
OSD timeout 5 ... 60 seconds adjust time after the OSD menu is automatically fade out
the adjustment ensures between 5 to 60 s in steps of5 s.
OSD background Opaque – Transparent select background color of the OSD menu
you have the choice between transparent and colored
background.
Noise suppression ON - OFF Standard adjustment OFF.
By ON: Activate the function noise suppression. This function
suppresses interference at the sync signal lines to avoid
A new auto adjustment during short interference.
LCD-Monitor SCD 1515-E page 49 / 56
DOC-No.: B30058DE8.doc