manualshive.com logo in svg

Siemens SCALANCE XR-300M, Краткое руководство по эксплуатации

Поделиться
Скачать
Siemens SCALANCE XR-300M Скачать руководство пользователя страница 52

Terminal block assignment (4-pin)

Table 6-3

Pinout of the 24 V safety extra-low voltage (SELV)

Pin number

Assignment (24 VDC)

Labeling (example)

Pin 1

L1+ (24 VDC)

Pin 2

M1

Pin 3

M2

Pin 4

L2+ (24 VDC)

To wire up the power connector, use a copper cable of category 18-12 AWG or cable with a 

cross-section of 0.75 to 2.5 mm².

6.7.2

Connecting devices with 100 to 240 VAC power supply

WARNING

Danger to life from line voltage for devices with a 240 V AC supply voltage
This device can only function correctly and safely if it is transported, stored, set up, and 

installed correctly, and operated and maintained as recommended.
Connecting and disconnecting may only be performed by an electrical specialist.
Connect or disconnect power supply cables only when the power is turned off!

WARNING

Devices with a 100 ... 240 V AC supply voltage do not have an approval for hazardous areas
Devices with a 100 ...240 V AC supply voltage are not approved for use in hazardous areas 

according to ATEX, IECEx, FM and UL HazLoc.

NOTICE
Securing cables with dangerous voltage
Make sure that the connector cannot be released accidentally by pulling on the connecting 

cable. Lay the cables in cable ducts or cable channels and secure the cables, where 

necessary, with cable ties.

Connecting up
6.7 Power supply

SCALANCE XR-300M

52

Compact Operating Instructions, 11/2019, A5E02661171-15

Содержание SCALANCE XR-300M



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды