manualshive.com logo in svg

Siemens SCALANCE XR-300M, Краткое руководство по эксплуатации

Поделиться
Скачать
Siemens SCALANCE XR-300M Скачать руководство пользователя страница 37

NOTICE
Failure of the data traffic due to contamination of optical plug-in connections
Optical sockets and plugs are sensitive to contamination of the end face. Contamination can 

lead to the failure of the optical transmission network.
Close unused optical sockets and plugs as well as pluggable transceivers and slots with the 

supplied protective caps.
Remove the protective caps only immediately before you use the plug-in connection.

NOTICE
Use only approved SFPs
If you use components not approved by Siemens AG, in particular SFPs, Siemens cannot 

accept any responsibility for the correct functioning of the "Ethernet switch system" according 

to the specification.
Moreover, if components are used that have not been Siemens approved, Siemens cannot 

vouch for their compatibility or for risk-free use of these components.

Note
Use media modules only in an approved modular device
Use an MM900 media module only for a device equipped with suitable slots for such modules. 

Example: X308-2M.
The names and labeling of the media modules differ
● Example: The device is called, for example, MM992‑2SFP" [6GK5 992‑2AS00‑8AA0], the 

labeling on the device is “9922AS”. You will find detailed information on the labeling of the 

media modules in the "MM900 media modules" compact operating instructions.

Note
SFP transceivers with the SCALANCE XR324-4M EEC
In contrast to the information in the product documentation for the SCALANCE MM900, 

MM992-2SFP media modules can be operated in the SCALANCE XR324-4M EEC at ambient 

temperatures up to a maximum of 70 °C if the following requirements are met:
● MM992-2SFP media modules as of hardware product version 02 are suitable. The 

hardware product version can be found on the device. You can also read out this information 

with the WBM or the CLI.

● Only the following SFP transceivers may be used:

– SFP991-1
– SFP991-1LD
– SFP992-1
– SFP992-1LD

Mounting

5.4 Installation of modular devices

SCALANCE XR-300M

Compact Operating Instructions, 11/2019, A5E02661171-15

37

Содержание SCALANCE XR-300M



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды