Siemens SCALANCE XR-300M PoE Series Скачать руководство пользователя страница 5

Страница: 5 / 92

Introduction

Purpose of the compact operating instructions

These compact operating instructions support you when installing and connecting devices of
the SCALANCE XR-300M PoE product group.

Validity of these compact operating instructions

These compact operating instructions are valid for the following devices:

• XR324-4M PoE

• XR324-4M PoE TS

Names of the devices in these operating instructions (compact)

Classification

Description

Terms used

Product line

For all devices and variants of all product groups within the SCALANCE
X-300 product line, the term "IE Switches X-300" is used.

IE Switches X-300

Product group

For all devices and variants of a product group, only the product group is
used.

XR-300M PoE

Device

For a device, only the device name is used.

XR-324-4M PoE

Variant

For a variant of the device, the device name has the appropriate variant
added to it in brackets.

XR324-4M PoE
(1 x 24 V DC, cable outlet
front)

Overview of technical documentation on the IE switches SCALANCE X‑300

You will find the technical documentation for the SCALANCE X‑300 product line in the following
documents:

• Configuration manual (PH), available as PDF document

The configuration manual describes the software for the two product lines SCALANCE X‑300
and SCALANCE X‑400.

• Compact operating instructions (BAK), supplied with the device in printed form

The compact operating instructions describe devices within a product group.

• Operating instructions (BA), available as PDF document

The operating instructions describe all devices of the product line and provide generally valid
information on the devices.

SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15

Содержание SCALANCE XR-300M PoE Series





























































































Результаты поиска

Содержание SCALANCE XR-300M PoE Series

Отзывы:

Похожие инструкции для SCALANCE XR-300M PoE Series

Бренды по названию

Популярные бренды

Siemens SCALANCE XR-300M PoE Series, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR-300M PoE Series

Отзывы:

Похожие инструкции для SCALANCE XR-300M PoE Series

Бренды по названию

Популярные бренды