Siemens SCALANCE W786-xPRO Скачать руководство пользователя страница 24

Страница: 24 / 250

Description

2.4 LED display

SCALANCE W786-xPRO

Operating Instructions, Release 08/2007, C79000-G8976-C221-02

LED Color

Description

Green

Access Point Mode:

The WLAN interface is initialized and ready for operation.

Client Mode:

There is a connection over the first WLAN port.

Flashing green

Access Point Mode:

The channels are being scanned.

Client Mode:

The client is searching for a connection to an access point or ad hoc

network.

Green flashing

quickly

Access Point Mode:

With 802.11h, the channel is scanned for one minute for primary users

before the channel can be used for data traffic.

Client Mode:

The client waits for the adopt MAC address due to the setting <Auto Find

Adopt MAC> and is connected to no access point.

Green

3x fast,

1x long flashing

Client Mode:

The client waits for the adopt MAC address due to the setting <Auto Find

Adopt MAC> and is connected to an access point.

Flashing yellow PRESET-PLUG detected.
Yellow/green PRESET

function completed successfully.

Yellow

Access Point Mode:

Data transfer over the second WLAN port.

Client Mode:

The LED is always off because the 2nd port is not available in client

mode.

Green

Access Point Mode:

The WLAN interface is initialized and ready for operation.

Client Mode:

The LED is always off because the 2nd port is not available in client

mode.

Flashing green

Access Point Mode:

The channels are being scanned.

Client Mode:

The LED is always off because the 2nd port is not available in client

mode.

Green flashing

quickly

Access Point Mode:

With 802.11h, the channel is scanned for one minute for primary users

before the channel can be used for data traffic.

Client Mode:

The LED is always off because the 2nd port is not available in client

mode.

Flashing yellow PRESET-PLUG detected.

Yellow/green PRESET

function completed successfully.

R3 Yellow

Access Point Mode:

Data transfer over the third WLAN port.

Client Mode:

The LED is always off because the 3rd port is not available in client

mode.

Содержание SCALANCE W786-xPRO



























































































































































































































































Результаты поиска

Содержание SCALANCE W786-xPRO

Отзывы:

Похожие инструкции для SCALANCE W786-xPRO

Бренды по названию

Популярные бренды

Siemens SCALANCE W786-xPRO, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE W786-xPRO

Отзывы:

Похожие инструкции для SCALANCE W786-xPRO

Бренды по названию

Популярные бренды