4
Fig. 9
6. Close and seal the housing (Fig. 9)
1 - Glue the circuit diagram to the inside of the cover
Q
.
2 - Engage the cover in the retainer.
3 - Connect the earthing lead
W
to the cover.
4 - Lightly lift and close the cover.
5 - Tighten cover retaining screws.
6 - Use eye
E
to seal.
When the cover is opened again, e.g. for servicing, there is no
need to remove it completely. After slackening the screws, the
cover can be lifted gently, swung downwards and suspended
in the base.
7. Technical data
Mains voltage 240V, 50Hz
Power consumption (230V) 230mA
Mains supply fuse 500 mA slow-blowing
Output power 12V
DC
, 2.3 A
Max. ripple at 2.3 A 60mV
pp
Relay, single-pole changeover 48V, 5A
Battery min V-2 (optional) 12V, 24Ah
Operating temperature -10°C to +40°C
Steel housing 1.5 mm
Dimensions in mm H 500 x W 365 x D 133
Safety class IP 30
Environmental class II
Weight without battery 8.4 kg
The right to make technical changes to the described equipment
without prior notice is reserved.
