Siemens S55561-F112 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 40

Siemens S55561-F112 Скачать руководство пользователя страница 20

20 / 40

Siemens

Ultrasonic heat and cooling energy meters UH50..

CE2N5324en

Building Technologies

2013-01-14

Multipolar connection terminals are used to connect external cables to the
modules.

Choice of connections:
- Solid or stranded wire

0.2…2.5 mm²

- Stranded wire with ferrule

0.25…1.5 mm²

- Cable sizes

26 - 14 AWG

Multiline connection (2 lines of same cross-sectional area)
- Solid or stranded wire

0.2…0.75 mm²

- Stranded wire with ferrule without plastic sleeve

0.25…0.34 mm²

- Stranded wire with TWIN ferrule and plastic sleeve 0.5…0.75 mm²

Recommended screwdriver

0.6 x 3.5 mm

Tightening torque

0.4 Nm

The outer diameter of the cable must be between 4 mm and 6 mm. All cables must
enter trough the meters’ bushings. It may be convenient to connect the cables be-
fore the meter in a single multi-conductor cable on a split box.
If a shielded cable is used, the shield must not be connected to the side of the me-
ter (connect to one end only).

The pulse modules (WZU-P2 and WZU-P2L) enable the meter to communicate
with a pulse collector to transmit measured values. It permits the output of pulses
that can be derived from the quantity of heat, volume, tariff register 1 or tariff
register 2. Two channels are available whose functions can be parameterized with
the service software.

The outputs are in the form of standard pulses or "fast pulses". The pulse duration
is identical for channel 1 and channel 2.

The modules can be plugged into both sockets, but fast pulses can only be output
via socket 2.

The pulse modules are available in 2 different versions:

WZU-P2

Pulse module

with 2 channels to output standard or "definable"

pulses

WZU-P2L

Pulse module with opto MOS output,

low voltage drop and

reversed polarity protection

Standard pulse valencies

*) depending on the unit for heat display

Pulse modules
WZU-P2/WZU-P2L

Function data

Note

Standard pulses

«
...
18
19
20
21
22
...
»

Содержание S55561-F112









































Отзывы:

Нет отзывов