
Information and Communication Products
Mobile Phones
Service Manual S25 / S2588
V 1.0
ICP CD ST
R. Fleuren
Sm_S25_lvl2_v11
Page
14
of 35
06/99
5.
Place the operating module on the radio and control module, open the connector, and
insert the flexible cable. Then close the connector again. See figures below.
Warning!
The flexible cable must be inserted parallel in the connector right up to the
stopper. The connector must snap into place at the stopper.
6.
Now place the connected modules simultaneously in the
upper housing section.
7.
Place the clip on the lower RF-screen lid. The projection on
the clip must be fitted into the corresponding hole in the
screen lid.
8.
Place the ringer on the clip. The retaining projections on the
clip must be fitted exactly into the holes in the ringer.
Warning!
If there is no spacer on the clip, please glue one on
beforehand.
9.
Connect the ringer plug-in connector.
Warning!
The cable must be introduced
between
screen frame and the
RF socket. Otherwise it could be damaged during assembling
the housing of the phone.
Содержание S25
Страница 39: ...14 09 99 s25 vgb S25 englisch A31008 H3100 A1 3 7619 8 User Guide ...
Страница 42: ...14 09 99 s25 vgb S25 englisch A31008 H3100 A1 3 7619 ...
Страница 100: ...14 09 99 S25 gb fm S25 englisch A31008 H3100 A1 3 7619 60 ...
Страница 104: ......