
Information and Communication Products
Mobile Phones
Service Manual S25 / S2588
V 1.0
ICP CD ST
R. Fleuren
Sm_S25_lvl2_v11
Page
13
of 35
06/99
4.4
Assembling the S25
Attention: ESD regulations have to be followed!
1.
First place the IR interface window and the loudspeaker in
the upper housing section.
WARNING!
If there is no spacer on the loudspeaker, please glue one on
beforehand.
2.
Now place the dust protection frame in the upper housing
section.
Warning!
The copper side of the dust protection frame must face the
upper housing section. The dust protection frame clip must be
bent so that it is lying on the receiver casing spacer.
3.
Place the keypad mat in the upper housing section.
4.
If necessary, open the plug-in connector on the radio and control module, insert the
flexible cable and close the plug-in connector again (see figures below).
Warning!
The flexible cable must be inserted parallel in the connector right up to the stopper. The
connector must snap into place at the stopper.
Содержание S25
Страница 39: ...14 09 99 s25 vgb S25 englisch A31008 H3100 A1 3 7619 8 User Guide ...
Страница 42: ...14 09 99 s25 vgb S25 englisch A31008 H3100 A1 3 7619 ...
Страница 100: ...14 09 99 S25 gb fm S25 englisch A31008 H3100 A1 3 7619 60 ...
Страница 104: ......