Siemens RWD Series, Инструкция по применению

Страница: 7 / 7

RWD44U/45U/62U/68U/82U Controllers Application Guide Quick Reference
Document Number 125-3511
March 28, 2005
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners.
© 2005 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Your feedback is important to us. If you have
comments about this document, please send them to
Table 12. RWD62U/68U/82U PS 3 Auxiliary Function Parameter Set-up.
Auxiliary Number:
Parameter Description
#x1
REM
#x2
LIM #x3
LIM #x4
COMP
#x5
CAS
#x6
WIN/SUM
#x7
WIN/SUM
XDZ Dead zone or offset (refer to the above explanation) x
MAX Value to start Limiter cooling x x
MIN Value to start Limiter heating x x
XP-h P-band in Limiter heating x x
XP-c P-band in Limiter cooling x x
TN-h Integrating time heating x x x
TN-c Integrating time cooling x x x
COMP start point heating/reverse acting x
COMP end point heating/reverse acting x
Adjustment in heating/reverse acting x
COMP start point cooling/direct acting x
COMP end point cooling/direct acting x
Adjustment in cooling/direct acting x
MAX Maximum of virtual setpoint x
MIN Minimum of virtual setpoint x
XPh1 First heating/reverse acting P-band in Cascade x
XPc1 First cooling/direct acting P-band in Cascade x
WIN As X2 < WIN, Y1 is reverse acting x
SUM As X2 > SUM, Y1 is direct acting x
T
Time elapsed to allow next winter/summer
changeover (Y1 only)
x x
There are no auxiliary function parameters for Applications #x8 and #x9.
Buffalo Grove, IL 60089-4513
U.S.A. SBT_technical.editor@siemens.com Page 7 of 7
Document No. 125-3505
Country of Origin: US