Siemens RUGGEDCOM WiN5100 Скачать руководство пользователя страница 82

Страница: 82 / 114

Chapter 6

CPE Management Interface

RUGGEDCOM WiN5100/WiN5200

User Guide

CPE Network Configuration

2. In the options panel, click the

Radius Login

link. The

Radius Login Settings

pane appears.

Figure 64: Radius Login Settings pane

3. Review and set the parameters in the following fields:

Table: Radius Login

Field

Description

Radius Login

To set the Radius Login authentication mode, select a value from this list.
Values: Enable | Disable

The configured Web Login AAA Server IP Address. Type an IP address in this field.

The configured Web Login AAA Server Port. Type a value in this field.

The configured Web Login AAA Server Secret. Type a value in this field.

NAS ID

The Radius NAS Identifier. Type a value in this field.

4. Click the

Apply

button.

Section 6.3

CPE Network Configuration

This section describes how to:
• set the CPE LAN and RF IP settings. See

Section 6.3.1, “ Network IP Settings ”

• set the CPE Ethernet settings. See

Section 6.3.2, “Ethernet Settings”

• set the Access List settings. See

Section 6.3.3, “Configuring the Access List”

Section 6.3.1

Network IP Settings

On the the

IP Settings

pane, configure the CPE’s LAN and RF IP addresses.

Содержание RUGGEDCOM WiN5100



















































































































Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы:

Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 82 / 114

Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы: