Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 87 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
Configuring the Access List 79
a. Click the Quick Start button. The Quick Start Settings pane appears.
b. Click the Reboot button.
Section 6.3.3
Configuring the Access List
If the Access List function is enabled, only MAC Addresses in this list will be able to pass data.
Procedure: Setting the Access List parameters
1. Click the
Network
button. The
Network
options appear in the options pane.
2. In the options pane, click the Access List link. The Access List pane appears.
Figure 69: Access List pane
3. Review and set the Access List settings in the following fields:
Table: Access List Configuration table
Field Description
Access List Displays the setting for the Access List.
Values: Enable | Disable
Total Number of Entries Type a number in the field.
Max Number of Self-Learned Entries Displays the maximum number of Self-Learned Entries
Default = 1
4. Review and set the Access List settings in the following fields:
Table: Access List table
Field Description
MAC Address Displays the MAC Address.