Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 63 / 856

RUGGEDCOM ROX II
User Guide
Chapter 3
Device Management
31
Device Management
This chapter describes how to configure and manage the device and its components, such as module interfaces,
logs and files. It describes the following tasks:
NOTE
For information about how to configure the device to work with a network, refer to Chapter 5, Setup and
Configuration .
• Section 3.1, “Determining the Product Version”
• Section 3.2, “Viewing Chassis Information and Status”
• Section 3.3, “Viewing the Parts List”
• Section 3.4, “Shutting Down the Device”
• Section 3.5, “Rebooting the Device”
• Section 3.6, “Restoring Factory Defaults”
• Section 3.7, “Decommissioning the Device”
• Section 3.8, “Managing Files”
• Section 3.9, “Managing Logs”
• Section 3.10, “Managing the Software Configuration”
• Section 3.11, “Upgrading/Downgrading the ROX II Software”
• Section 3.12, “Managing ROX II Applications”
• Section 3.13, “Managing Feature Keys”
• Section 3.14, “Installing and Backing Up Files”
• Section 3.15, “Managing Fixed Modules”
• Section 3.16, “Managing Line Modules”
• Section 3.17, “Managing Event Trackers”
• Section 3.18, “Managing Switched Ethernet Ports”
• Section 3.19, “Managing Routable Ethernet Ports”
• Section 3.20, “Managing Serial Ports”
• Section 3.21, “Managing Serial Port Protocols”
• Section 3.22, “Managing Ethernet Trunk Interfaces”
• Section 3.23, “Managing Cellular Modem Interfaces”
• Section 3.24, “Managing WAN Interfaces”
• Section 3.25, “Managing Virtual Switches”
• Section 3.26, “Managing a Domain Name System (DNS)”