Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 143 / 856

RUGGEDCOM ROX II
User Guide
Chapter 3
Device Management
Managing Serial Ports 111
Parameter Description
Admin Status Synopsis: tx-only, rx-only, rx-tx, no-lldp
Default: rx-tx
• no-lldp : The local LLDP agent can neither transmit nor receive LLDP frames.
• rxTx : The local LLDP agent can both transmit and receive LLDP frames through the
port.
• txOnly : The local LLDP agent can only transmit LLDP frames.
• rxOnly : The local LLDP agent can only receive LLDP frames.
Notify Disabling notifications will prevent sending notifications and generating alarms for a
particular interface from the LLDP agent.
5. Add a VLAN ID (VID) for the port. For more information, refer to Section 5.35.8.3, “Adding a VLAN ID to a
Routable Ethernet Port or Virtual Switch” .
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.20
Managing Serial Ports
The following sections describe how to configure and manage serial ports:
•
Section 3.20.1, “Viewing a List of Serial Ports”
• Section 3.20.2, “Viewing Serial Port Statistics”
• Section 3.20.3, “Viewing Transport Connection Statistics”
• Section 3.20.4, “Viewing DNP Device Table Statistics”
• Section 3.20.5, “Clearing Serial Port Statistics”
• Section 3.20.6, “Configuring a Serial Port”
• Section 3.20.7, “Restarting the Serial Server”
• Section 3.20.8, “Resetting a Serial Port”
Section 3.20.1
Viewing a List of Serial Ports
To view a list of serial ports configured on the device, navigate to interface » serial . The Serial Interfaces table
appears.