Siemens RUGGEDCOM RS1600, Руководство по установке

Страница: 40 / 42

Certification
6.2 EMC and Environmental Type Tests
Test Description Test Levels Severity
Levels
IEC 61000-4-11 100% for 5 Periods,
100% for 50 Periods
Signal Ports 2.5 kV Common, 1 kV
Differential Mode @ 1 MHz
3
DC Power Ports 2.5 kV Common, 1 kV
Differential Mode @ 1 MHz
3
IEC 61000-4-12 Damped
Oscillatory
AC Power Ports 2.5 kV Common, 1 kV
Differential Mode @ 1 MHz
3
Signal Ports 30 V Continuous, 300 V for 1 s 4 IEC 61000-4-16 Mains
Frequency
Voltage
DC Power Ports 30 V Continuous, 300 V for 1 s 4
IEC 61000-4-17 Ripple on DC
Power Supply
DC Power Ports 10% 3
Signal Ports 2 kVAC (Fail-Safe Relay output)
DC Power Ports 1.5 kVDC
Dielectric
Strength
AC Power Ports 2 kVDC
Signal Ports 5 kV (Fail-Safe Relay Output)
DC Power Ports 5 kV
IEC 60255-5
HV Impulse
AC Power Ports 5 kV
EMC Immunity Type Tests per IEEE 1613
Note
The RS1600 meets Class 2 requirements for an all-fiber configuration and Class 1
requirements for copper ports. Class 1 allows for temporary communication loss,
while Class 2 requires error-free and interrupted communications.
Description Test Levels
Enclosure Contact ± 8 kV ESD
Enclosure Air ± 15 kV
Radiated RFI Enclosure Ports 35 V/m
Signal Ports ± 4 kV @ 2.5 kHz
DC Power Ports ± 4 kV
AC Power Ports ± 4 kV
Fast Transient
Earth Ground Ports ± 4 kV
Signal Ports 2.5 kV Common mode @ 1MHz
DC Power Ports 2.5 kV Common and Differential Mode @ 1MHz
Oscillatory
AC Power Ports 2.5 kV Common and Differential Mode @ 1MHz
Signal Ports 5 kV (Failsafe Relay)
DC Power Ports 5 kV
HV Impulse
AC Power Ports 5 kV
Signal Ports 2 kVAC (Failsafe Relay) Dielectric
Strength
DC Power Ports 1.5 kVDC
RUGGEDCOM RS1600
Installation Manual, 01/2021, C79000-G8976-1013-03
31