Certification
6.1.3 FCC
•
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
•
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
•
EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
•
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
"Contacting Siemens (Page vii)"
6.1.3
FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
IMPORTANT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
28
RUGGEDCOM RS1600
Installation Manual, 01/2021, C79000-G8976-1013-03
