background image

5/8 

Siemens Building Technologies 

Room temperature controllers 

CE1N3031en 

HVAC Products 

 

24.09.2003 

If there are thermostatic radiator valves in the reference room, they must be set to their 
fully open position. 
 

The controller is maintenance-free. 
 
If the temperature on the display does not agree with the room temperature effectively 
measured, the temperature sensor can be recalibrated. For that purpose, both buttons 

+

  

and 

 must be pressed simultaneously for 3 seconds. Then, the temperature 

displayed can be changed by a maximum of +/- 3 Kelvin by pressing the 

+

  

and 

-

 

buttons. Five seconds after the last push of a button, the controller will automatically 
return to the normal operational statuses. 
 
If the battery symbol appears, the battery power is almost exhausted and the batteries 
should be replaced. 
 
 
 

Technical data 

Operating voltage 

• 

RDD10 at L - N 

AC 230 V +10/-15 % 

• 

RDD10.1 

DC 3 V (2 x 1.5 V AAA Alkaline batteries) 

Frequency (RDD10) 

50 or 60 Hz 

Power consumption (RDD10) 

4VA 

Battery life (RDD10.1) 

> 1 years (AAA Alkaline batteries) 

Control output Q12 (N.C. contact) 

 

Rating RDD10    (AC 230 V) 

max. 5 A 

Rating RDD10.1 (AC 24...250 V) 

max. 5(2) A 

Control output Q14 (N.O. contact) 

 

Rating RDD10    (AC 230 V) 

max. 5 A 

Rating RDD10.1 (AC 24...250 V) 

max. 5(2) A 

Switching differential SD 

1 K 

Setpoint setting range 

5…35 °C (normal operation) 

 

0 (OFF) and 5…35 °C (energy saving mode) 

 Increments 

0.5 °C 

  Factory setting normal operation 

20 °C 

  Factory setting energy saving mode  8 °C 

Setting range of operating mode 
changeover time 

0.5…24 h 

 Increment 

0.5 

 

Factory setting 

0 h (not activated) 

Operation 

to IEC 721-3-3 

Climatic conditions 

class 3K5 

Temperature 0…+50 

°C 

Humidity 

<95 % r. h. 

Transport 

to IEC 721-3-2 

Climatic conditions 

class 2K3 

Temperature -25…+60 

°C 

Humidity 

<95 % r. h. 

Mechanical conditions 

class 2M2 

Storage 

to IEC 721-3-1 

Climatic conditions 

class 1K3 

Temperature -25…+60 

°C 

Humidity 

<95 % r. h. 

Maintenance 

Sensor calibration 

Change of batteries 
(only with battery-
powered versions) 

 Power supply 

Control outputs 

Functional data 

Environmental conditions 

Содержание RDD10 Series









Отзывы: