Siemens PCS 7, Руководство по установке

Страница: 21 / 156

3.5.2 PCS 7 project engineering with a single PC
Central engineering
You can configure a PCS 7 plant centrally for all PCS 7 applications (OS, BATCH, Route
Control, AS) with a single engineering station.
Connect the engineering station to the plant bus and the terminal bus when you download the
configuration information to the target systems and test it in process mode.
Example configuration
5HGXQGDQW26
VHUYHUV
(QJLQHHULQJ
VWDWLRQ
26FOLHQWV
26VHUYHU %$7&+
VLQJOHVWDWLRQ
3ODQWEXV,QGXVWULDO(WKHUQHW
7HUPLQDOEXV,QGXVWULDO(WKHUQHW
SIMATIC PCS 7 BOX
SIMATIC PCS 7 BOX can also be used as an engineering station for small standalone systems.
You can more find information on this in the manual
Process Control System PCS 7; SIMATIC
PCS 7 BOX.
3.5.3 Combination of engineering station and operator station on a single PC
Engineering station and operator station on a single PC
You can configure a small system, such as a training station, centrally for all PCS 7
components, for example, with OS, BATCH, Route Control, AS, with a single engineering
station.
You can combine the engineering station and an operator station for this purpose. The operator
station is configured as a so-called single station system in this case.
The example configuration below shows a plant with a common plant/terminal bus. Various
functions are carried out via this bus, for example, loading the configuration data to the target
systems, testing the plant and process mode.
PC components of a PCS 7 system
3.5 Solutions for engineering stations
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB
21