background image

Appendix

80

Appendix

Troubleshooting

Some malfunctions can be resolved without outside intervention. The fol-

lowing table provides a list of such malfunctions. All other malfunctions 

should be reported to the relevant service personnel.

Error

Possible cause

Remedy

No display.

The handset is not 
switched on.

Press the On-hook key 
until confirmation is 
received.

Batteries are empty.

Charge or replace the 
batteries.

You cannot dial an 
external number.

The handset is locked.

Unlock the handset.

No reaction to 
keystroke.

Keypad lock activated.

Press the hash key until 
confirmation is received.

The key is stuck.

Release the key.

De-crescendo tone 
sequence during 
input.

An incorrect entry was 
made.

Repeat key sequence 
while watching the 
display; where 
applicable, consult the 
operating instructions.

The line "Base n" 
flashes (n= 1 - 4).

The handset is outside 
the base radio range; 
radio signals too weak.

Come closer to the base 
radio range, change your 
position.

Handset not registered. Register the handset.

Intervals between 
synchronisation 
attempts are too long.

Switch off the handset 
and switch it back on 
again.

No ringer on the 
handset.

The ringtone is 
deactivated.

Activate ringer.

"Do Not Disturb" is 
activated.

Deactivate "Do Not 
Disturb".

Содержание OpenStage SL4 professional






























































































Отзывы: