Administration
A31003-O1010-M100-17-76A9, 09/09/2010
3-4
OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Access via Local Phone
OpenStage 60/80
If a parameter is set by entering a number or character data, the onscreen keypad is used.
Press the
i
key to enter the editor. Within the editor, solely use the key numbers or the
Sensor Wheel for selecting numbers, characters, or groups of characters. The
h
key de-
letes one character in the input field, and the
g
key moves the cursor to the OK field.
The following figure describes the elements of the onscreen keypad and their functions:
Additionally, you can use the following keys on the keypad as shortcuts for the selection of
character groups
OpenStage 15/20/40
With the OpenStage 15/20/40, use the keypad for entering parameters. With the 3 way/5
way navigator, you can enter, delete, copy and paste characters and numbers as well as
navigate within an entry and toggle the input mode.
6. Save and exit
When you are done, select
Save & exit
and press
.
Element
Function
*
Switch to punctuation and special characters.
#
Toggle between lowercase characters, uppercase characters, and digits.
Element with focus
Letters, digits, punctuation marks or special characters
Cancel
Shift to numeric entry Shift to punctuation and special charac-
Shift to upper/lower case Shift to upper/lower case
Insert clipboard contents at cursor position
Move cursor left/right
Shift to punctuation and special characters
Copy contents of active field to clipboard
Confirm