7ML19985CS01
Milltronics Millflo – INSTRUCTION MANUAL
Page 17
In-Feed/Discharge Air Pressure
Flowguide Capacity
Refer to the following chart to ensure the flowguide capacity is suitable.
Note:
If the material bulk density and flowrate is near a Millflo infeed diameter
upper limit, choose the next largest diameter.
•
Vent the in-feed and discharge chutes to a
common dust collector if a material in-feed/
discharge differential air pressure is
anticipated and rotary airlock feeders are
not used.
•
A tuning gate can be installed in each vent
to balance the air pressure.
•
If a dust collector is not used, an air bypass
chute can be installed between the
flowmeter in-feed and discharge chutes.
to common dust
collector
Содержание Milltronics MILLFLO
Страница 1: ...MILLFLO milltronics Instruction Manual September 2003 ...
Страница 4: ...ii ...
Страница 23: ......